Yorkshire public buildings

Council and public sector joinery restoration.

Keep the joinery that belongs to your building. From careful stripping to dark oak staining and lacquer finishing, we restore timber doors and turned joinery for Yorkshire’s councils, schools and heritage spaces.

Restored dark oak double doors in a civic hall entrance
Dark oak staining and a satin lacquer finish on original civic entrance doors.

Featured project

Ongoing project

Morley, Leeds · Heritage building

An ongoing door restoration project at the Grade I listed Morley Town Hall, completed in 1895 and designed by Henry Holtom and George Arthur Fox.

Scope of work

  1. 01

    Remove existing paint and stain from doors

  2. 02

    Refinish the prepared timber in a dark oak stain

  3. 03

    Apply a sprayed lacquer top coat

Restoration sequence

The character remains. The finish is renewed.

Civic entrance door restoration: before stage
BeforeExisting paint and finish, ready for careful removal.
Civic entrance door restoration: during stage
DuringExposed timber prepared for repairs and a new finish.
Civic entrance door restoration: after stage
AfterDark oak staining and a satin lacquer finish.

Character at every scale.

Angled view of restored dark oak doors beside a sunlit stone arcade
Rich timber tones, seen in the context of a heritage interior.
Close-up of aged brass ironmongery against richly grained oak
A closer look at the grain, finish and traditional ironmongery.

Restoration services

A complete door and joinery finishing service.

Carried out from our Honley workshop, or on site where the joinery cannot travel.

  • 01

    Paint and finish stripping

    Removal of old paint, stain and finish from doors and architectural joinery.

  • 02

    Timber repairs

    Repair work for damaged or worn timber before the finishing process begins.

  • 03

    Staining

    Timber staining, including dark oak finishes for established interior schemes.

  • 04

    Colour matching

    Finish matching where restored joinery must sit alongside existing woodwork.

  • 05

    Spray lacquer finishing

    A sprayed lacquer top coat for a consistent, durable finished surface.

  • 06

    Turned replacements

    Spindles, newel posts and turned sections matched to the existing profile on our lathes.

Planning the work

Working in buildings that stay open.

Schools, halls and council offices keep running while the work happens. Access, phasing and sequencing are agreed with your team before anything starts, so the building carries on around us.

  • Access and working-area requirements
  • Phasing around building use
  • Communication with the project team
  • Sequencing and handover arrangements
Workshop scene showing careful hand preparation of a timber door
Care in the preparation. Character in the finish.
Sunlit civic interior framed by rich oak doors
Joinery considered as part of the whole building.

Project portfolio

Different buildings. The same care for timber.

Restored school corridor joinery

Education

School corridor joinery

Timber preparation, colour matching and a clear protective finish for glazed corridor doors.

Restored library entrance restoration

Public library

Library entrance restoration

Careful preparation and rich timber staining to complement a traditional reading room.

Restored civic hall entrance

Civic building

Civic hall entrance

Panelled door restoration with dark oak staining and a sprayed lacquer top coat.

Procurement documentation

Reassurance before work begins.

Documentation and working practices are shared with you before any work begins.

Insurance
Public liability cover and supporting policy details.
Health & safety
Site-specific planning, safe working areas and coordination.
School access
Confirmed safeguarding and staff-check arrangements where applicable.
Accreditations
Verified memberships and approved-contractor frameworks, if held.

Before you enquire

A few practical questions.

For procurement teams, school business managers, architects and everyone else responsible for keeping a public building in good hands.

What should we send with an initial enquiry?
The building location, approximate door count and a few photographs are a useful starting point. Include any specification, required finish, tender deadline or proposed programme you already have. An early enquiry does not need a complete door schedule.
Can we discuss work in an occupied school or public building?
Yes. Explain how the building is used, which areas need to remain accessible and any school holiday or closure windows. Access, safeguarding requirements and sequencing should form part of the project discussion before the scope is agreed.
What if the building is listed or the joinery has specialist requirements?
Include the listing details and any guidance from your architect or conservation officer. Flag fire-door requirements at the outset too: a decorative restoration should not be treated as evidence of fire performance or a substitute for the relevant specialist assessment and approvals.
Can you match existing turned sections and timber colour?
Turned replacements are cut to match the existing profile on our lathes, and colour matching is part of the service. Share photographs and, where available, a sample or specification. Existing timber, its condition and previous treatments all inform the proposed stain and lacquer finish.
Can we request a portfolio or discuss a site visit?
Yes. Contact the workshop to request the available project portfolio or discuss a site visit and quotation. Tell us whether you are preparing a tender, gathering options or working towards an agreed programme so the conversation can focus on what you need next.

Procurement enquiries

Let’s plan the next chapter of your building.

A tender in progress, a school holiday window, or a civic entrance that needs attention? Tell us what you are planning. Request a site visit, a project quote or the available portfolio, and start with a conversation about your building.

Helpful details to include

  • Project location and building type
  • Approximate door count, required finish and target programme
  • Preferred contact route and any tender information
Spindles Woodturning and Stairs Parts
Unit 3, Crossley Mills, Honley, Holmfirth
West Yorkshire HD9 6PL

Send a project enquiry

Tell us about your building and the restoration work you have in mind.

Public sector project enquiry details

Include the approximate door count, finish and target programme where known.

These details will only be used to respond to the enquiry. Read our privacy policy.